+370 5 2715444
Elega
CompanyAbout productsE-shopContacts
ElegaTied Expansion Joints, Flanged

Tied Expansion Joints, Flanged

On order

Tied Expansion Joints, Flanged

info@elega.lt Call

Documents

  • Download brochureFAILAS · 615 KBDownload

CHARACTERISTICS

Universal Tied Expansion Joints, Flanged. Axial expansion: ±15-30, Lateral expansion: ±75-100 mm

  • Two-way movements can be absorbed using the coupled expansion joints.
  • Universally coupled equalizer connector consists of two spirals (bellows).
  • The bellows are interconnected.
  • There may also be intermediate pipe systems that can withstand the internal pressure due to the resulting traction.

Motion absorption

  • This type of expansion joints are used to absorb lateral movements in all planes.
  • Due to the special position of the two mounting bars at 180 degrees, the expansion joints can simultaneously absorb lateral and angular deformations.
  • The size of the lateral deformation depends on the number of bellows connections on each side of the expansion joint.
  • This amount can also be increased by changing the length of the intermediate pipe.
  • The studs help to avoid possible twisting forces.

Advantages of Universal Attached Expansion Joints

  • Absorption of lateral movements in all planes;
  • Easily absorbs large expansion forces;
  • Little space;
  • Protects against axial inaccuracies, improves system security.

Construction

  • Bellow material: Stainelss Steel AISI 321 (order: 304, 316L, 316TI, 309);
  • Connection types: fixed flanges and welded ends;
  • Flange material: carbon steel St.37.2, other materials are ordered;
  • Intermediate pipe material: carbon steel St.37.2, other materials are ordered;
  • Spun material: carbon steel St.37.2, other materials are ordered.

Working conditions

  • Operating temperature: -80 ° C / + 600 ° C.
  • Working pressure: 16 bar.
  • Nominal diameter: DN25 - DN300.

Related products

Axial expansion joints aim to absorb the axial expansionsAxial expansion joints aim to absorb the axial expansionsAxial Expansion Joint with 30mm expansion capacity without inner sleeveAxial Expansion Joint with 30mm expansion capacity without inner sleeveAxial Expansion Joint with 30mm expansion capacity with inner sleeveAxial Expansion Joint with 30mm expansion capacity with inner sleeveAxial Expansion Joint with 60mm expansion capacity with inner sleeveAxial Expansion Joint with 60mm expansion capacity with inner sleeve30-60 mm Axial Expansion Joint with Welded End30-60 mm Axial Expansion Joint with Welded EndX-Pressed Expansion JointX-Pressed Expansion JointX-Pressed Expansion Joints with Fixed flange and Floating Flange on the other endX-Pressed Expansion Joints with Fixed flange and Floating Flange on the other endX-Pressed Expansion Joints with Fixed flange and Floating Flange on the other end DBKF-90 DBKF-120X-Pressed Expansion Joints with Fixed flange and Floating Flange on the other end DBKF-90 DBKF-120X-Pressed Expansion Joints with Welded Ends DBKK-30, 60, 90,120X-Pressed Expansion Joints with Welded Ends DBKK-30, 60, 90,120District Heating Expansion JointsDistrict Heating Expansion JointsSingle Bellowed District Heating Expansion Joint With Welded EndsSingle Bellowed District Heating Expansion Joint With Welded EndsDouble Bellowed District Heating Expansion Joint With Welded EndsDouble Bellowed District Heating Expansion Joint With Welded Ends
Tree
Elega

UAB „Elega“
Žalgirio 131-211, 08217 Vilnius

CompanyAbout productsProductsE-shopContactsTree
+370 5 2715444

info@elega.lt

© 1995-2026 UAB "Elega"Slapukų naudojimas
Products