Electro-pneumatic hammer MARTSHOCK PS to hoper
Documents
CHARACTERISTICS
Electro-pneumatic hammer MARTSHOCK PS to hoper
- MARTSHOCK PS Single Impact Pneumatic Hammers produce a shockwave generated by a single impact of an internal piston on the metallic base welded on the , or wall.
- This action is particularly efficient if the powder at issue tends to pack under pressure or stick to the or wall.
- Moreover, MARTSHOCK PS is an efficient solution against bridging or rat-holing problems.
- MARTSHOCK PS Single Impact Pneumatic Hammers are particularly suitable retrofitting existing cones or hoppers since of the or drilling of the wall is not required.
- Operation should be intermittent at a pressure ranging from 3 to 6 bar (44 ~ 87 PSI).
- When operating multiple hammers, those at the bottom should be activated first, moving progressively upwards at regular intervals to the remaining ones.
- MARTSHOCK PS robust design is suitable both outdoor indoor application.
- External body parts are manufactured from galvanized steel POM.
- MARTSHOCK PS are supplied with a mounting plate, which has to be welded on the or wall, as well as a safety chain preventing accidental dropping during installation or maintenance.
- To satisfy all market demands MARTSHOCK PS is available in three different sizes.
Accessories
- Coils available in different voltages from 24 V both DC and AC to 230 V (ATEX).
- Noise reduction and ATEX KIT plate (ATEX II3D cT(x)).
- Timer to adjust period of the blast (min 30 sec)Fully pneumatic kit











