Continuous Impact Vibrators P-series
On order
Continuous Impact Vibrators P-series
P-Series Continuous Impact Vibrators produce a shockwave generated by the continuous impact of their internal piston on the metallic base
CHARACTERISTICS
Continuous Impact Vibrators P-series
- P-Series Continuous Impact Vibrators produce a shockwave generated by the continuous impact of their internal piston on the metallic base mount welded on the or wall.
- They are particularly efficient with bulk materials that tend to stick to the wall.
- Typically P-series vibrators are used wet or electrostatics powders such as clay or , but also sludge or manure.
- P-Series Continuous Impact Vibrators help solving problems such as:
- formation of incrustations,
- bridging or rat-holing,
- operating continuously applying intermittent blows on the or at a pressure ranging from 2 to 6 bar.
- When operating multiple impact vibrators, those at the bottom should be activated first, moving progressively upwards at regular intervals to the upper ones.
- The robustness of the P-series design makes these vibrators suitable both outdoor indoor application, as well as high temperatures of up to 200 °C .
- The external body parts are manufactured from aluminium from powder-coated (RAL 2009) grey cast iron.
- P-Series vibrators are assembled on a base mounting plate (not supplied) which has to be welded on the , or wall.
- It is recommended to fix a safety chain to the vibrator to avoid accidental dropping during installation or maintenance.
- To satisfy all market needs three sizes are available.
Accessories
- Noise reduction ATEX KIT plate (ATEX EX II 2DG cT(x)).
- Safety chain.











