ZeoVit® Sorbent comprises a plurality of three-dimensional structure. It absorbs and releases water and can replace many cations without altering its internal structure.
A large number of cavities and channels to spend inside the water molecules that form the hydration sphere capable of exchanging cations.
ZeoVit® Sorbent can be used for carbon dioxide, methane, ammonia, hydrogen sulfide, oil, coolants, acids and chemicals, carbon monoxide and other gases and odors resulting from the decomposition of waste, collection.
Main cation, which involved ion exchange sorbent ZeoVit® pairs are as follows: Cs, Rb, K, NH4, Na, Ag, Cd, Pb, Zn, Ba, Sr, Cu, Hg, Fe, Co, Mn, Al, Cr, Mg, Li.
Ion exchange sequence of lining up in a specific order: Cs> Rb> K> Na> NH4> Ba> Sr> Na> Ca> Fe> Al> Mg> Li.
ZeoVit® Sorbent absorbs and releases water. Even long-time heated to high temperatures, it stably retains its ability to absorb many times and give water.
ZeoVit® Sorbent can be used as bactericides, insecticide and antacid human and animal needs.
Uses
Usually uses ZeoVit® Sorbent sprinkled pollution place. It can capture, neutralize and eliminate vapor, moisture, oil and chemical materials, stains, mold, odor, allergic materials.
When ZeoVit® Sorbent absorbs hazardous to health or the environment, materials, further its use is forbidden, and it is utilized as utilized in this matter, in other cases it can be inserted into the soil.
Neutralization of the oil spill.
Oil, fuel, coolant, and other materials spills assembly ZeoVit® Sorbent on their internal structure perfectly absorbs oil products.
The product does not have a smooth surface and breaking down, after absorbing fluids.
Soak flammable liquids, it does not become spontaneously flammable and explosive.
Used while applying the spill area, oil and grease, gasoline and diesel fuel stains by soaking them in a resin layer to fully absorb the spilled material, it would be dry.
Approximately 2-3cm ZeoVit® sorbent layer sprinkled on the spill location and held until liquid is absorbed.
To remove stains, should be maintained for about 24 hours. and again repeated until the stains will not go away.
Soak splits, sweeps and disposed of as for the recovery of oil products.
Oily and greasy surface drainage
Autoservises and workshops in many workshops, metal processing workshops and so on. is greasy or oily surfaces, poured coolants, chemical products, due to occur in accidents and injuries, pollution of the environment.
Approximately 2-3cm ZeoVit® Sorbent layer sprinkled with fat, oil, grease, gasoline, diesel fuel spill.
Soak fluids sweeps and disposed of as for the recovery of oil products.
Chemicals assembly
Split of chemicals apiberiami about 2-3 cm thick layer of ZeoVit® Sorbent and absorb spilled liquids and of gases.
Soak schematic materials, sweeps and disposed of as provided for in chemicals.
Ceramic tile, concrete floor cleaning
ZeoVit® Sorbent removes split liquids and stains from the surface of the floor - ZeoVit®Sorbent richly sprinkled pollution place.
Wait until dry, then wiped out or are extracted with a vacuum cleaner.
To remove the smell, it should be about 2-3 cm spill ZeoVit®Sorbent layer for approximately 24 hours.
Concrete road and track cleaning
No othe does not sanitize petroleum products and solvents stains from concrete, kaipZeoVit®Sorbent.
ZeoVit®Sorbent layer slick poured(1-2cm thick) and leave for 2-3 days, then collect the sorbent.
This procedure is repeated again if the washing of the rain.
Metal and plastic floor cleaning
ZeoVit®Sorbent swept slippery, sticky shop, garage or automotive service shop floor surfaces absorb spills, car cooling system, brakes, batteries, solvents, liquids, petroleum products and lubricants.
Ski tracks gritting pavements and slippery, Icy sidewalks and paths every year causes a lot of accidents.
In order to break the ice, ZeoVit®Sorbent sprinkled on sidewalks, paths. It can be used immediately after cleaning the snow.
When snow and ice melt, ZeoVit®Sorbent simply wiped out on the grass.
Carpet cleaning
ZeoVit®Sorbent well absorbed by the carpet or synthetic carpeting, upholstery odors, cleans stained the floor, even if they are concrete.
Always test - or sometimes ZeoVit®Sorbent does not change the color of the carpeting.
After that, the surface quite abundantly sprinkle ZeoVit®Sorbent, leave for a few hours, clean the pump.
ZeoVit®Sorbent well cleans a variety of stains and spilled liquids.
Some stain removal can require quite a lot of time - up to 24 hours.
Failing to immediately clean up the stain with water and moisten again pour ZeoVit® sorbent, and then clean the vacuum cleaner.
Disposal of garbage, waste containers
Waste, domestic waste - the largest unpleasant smell, insects and their larvae source.
Their content is reduced or completely canceled, if in the bottom of the container is filled and trash scattered across constantly ZeoVit® .
It absorbs different materials and prevents gases, odors and vapors into the environment.
Waste containers with sorbent ZeoVit® - significantly reduces unpleasant odors, moisture and deterioration of bacteria, insects and their larvae in the breeding conditions.
Animal litter
ZeoVit® sorbent absorbs unpleasant smell of animal urine.
ZeoVit® sorbents can be used in two ways:
first - you can use only ZeoVit® sorbent - adding 5-7.5 cm thick layer of the animal's toilet box;
second - ZeoVit® sorbents can be used in conjunction with other litter, adding 2-4 cm ZeoVit® sorbent layer of boxes at the bottom and on top of it and poured the normal litter.
When changing the litter, and is replaced by ZeoVit® Sorbent.
E-Shop
Elega Facebook
Tree