Hepa Clean 2500 Vacuum Duct cleaning machine

HepaClean 2500
Lifa HepaClean 2500 is an air-cleaning machine and vacuuming unit.
  1.     Airflow without filters 2800 m³/h (1650 CFM).
  2.     Cleaning and vacuuming dry air containing asbestos, mould, construction, quartz, powder and wood dust.
  3.     Removing gaseous compounds.
  4.     Vacuuming ventilation ducts.
  5.     Mono-phase current.
  6.     A broad selection of filters.
  7.     Good transferring properties for horizontal and vertical shifts in position.
  8.     Good industrial design.
  • HepaClean 2500 is intended for cleaning dry air containing asbestos, mould, construction, quartz, powder or wood dust.
  • When the machine is equipped with an active carbon filter, gaseous compounds can be removed.
  • The machine can also be used to create negative pressure in rooms and compartments.
  • HepaClean 2500 is a multi-function machine.
  • Although its main use is in mould dust and asbestos renovation, it is also suitable for creating negative pressure in ventilation ducts.
  • Lifa HepaClean 2500 uses mono-phase current.
  • The airflow of the machine without filters is 2800 m³/h.
  • The sealing and separating level of Lifa HepaClean 2500 has been tested with Lifa filters.
  • The vacuuming unit is very suitable for removing fine dust from the air, which is why it is commonly used in problem dust renovation.
  • The exhaust air does not need to be channelled outside when using a Hepa filter.
  • The Hepa filter has an extremely high separation level, which removes 99.97 % of particles over 0.3 µm in size.
  • The machine thus meets the criteria set for machines used in asbestos work.
  • The machine is equipped with filter combinations suitable for the work or cleaning target.
  • The manufacturer requires the use of filter combinations listed in the table.
  • A connection unit for both the suction and exhaust side is available as an accessory.
  • A flexible accordion hose, which can be installed near the demolition site, can be attached to the connection unit of the suction side.
  • The contaminants formed in the demolition work are sucked directly into the machine, before they are spread into the work site air.
  • With the help of the exhaust side connection unit and the plastic film sock, the exhaust air can be channelled outside the work site and thus the work site can be kept at a lower pressure than its environment.
  • Because of the lower pressure, contaminated air is unable to spread outside the work site.
Download brochure
Lifa Hydmaster Duct cleaning machine

Lifa Hydmaster Duct cleaning machine

Combi Cleaner 40 Duct cleaning machine

Combi Cleaner 40 Duct cleaning machine

Special Cleaner 25 Multi Duct cleaning machine

Special Cleaner 25 Multi Duct cleaning machine

Special Cleaner 20P Eelectric ventilation duct cleaning machine

Lifa Special Cleaner 20PE - electric ventilation duct cleaning machine

Combi Cleaner 15 Duct cleaning machine

Combi Cleaner 15. New grease duct cleaning machine, specifically designed and made to be used in small kitchen exhaust ducts and cramped spaces.

Duct Control Manual Duct cleaning machine

Duct Control Manual-Light and small hand controlled version for vertical and very small ducts where the use of robot is not available.

Air Jet Combi 20 Duct cleaning machine

Lifa AirJet Combi 20 - multi-functional compressed air blowing machine designed for cleaning with solvents and removal of loose dirt in ventilation ducts and other narrow cavities.

Special Cleaner 25 Duct cleaning machine

Special Cleaner 25 Multi - Electrical powered multi-use machine

Hepa Clean 4000 Duct cleaning machine

HepaClean 4000-air-cleaning machine and vacuuming unit

Hepa Clean 1100 Low pressure air vacuum cleaning machine
HepaClean 1100 - Negative pressure vacuum - air cleaner machine for small jobs
Duct Control Mini Remote camera

DuctControl Mini-remote controlled video/digital camera system.