Disinfection gate CLEAN GATE PLUS for institutions, companies and organizations

Disinfection gate CLEAN GATE PLUS for institutions, companies and organizations

•     CLEAN GATE PLUS is intended for non-contact temperature measurement and disinfection of the human body.
•     The device measures the temperature automatically, with an inaccuracy of ± 0.3 ° C, and can memorize faces.
•     The stainless steel passage design ensures complete safety in use.
•     The use of reliable components and modern solutions guarantees reliable operation.
•     The control system allows you to program the time of contamination and the amount of disinfectant solution used.
•     The cabin is easily accessible for people with wheelchairs.

Use

•     The body temperature is automatically measured before entering the gate.
•     If an elevated temperature is detected, a light and sound signal sounds, the cab takes a photo of the face and blocks the deactivation program.
•     If the body temperature is correct, a green light indicates the possibility of entering the cabin.
•     Upon entering the gate, the photocells detect the presence of a person and activate the nozzle system, the disinfectant solution is sprayed on the entire surface.
•     Microdroplets of disinfectant solution penetrate the pores of clothing and settle on the surface of viruses, bacteria and fungi.
•     The amount of solution used does not cause damage to or destruction of clothing.
•     The indicator red light comes on while the disinfectant is being sprayed.
•     The end of the disinfection is signaled by an audible signal, after which the cab light changes to green and the next disinfection process can be started.

Technical information

•     Purpose: to disinfect visitors, employees.
•     External dimensions: 1200 x 800 x 2300 mm (width x depth x height).
•     Passage dimensions: 1000 x 700 x 2050 mm (width x depth x height).
•     Housing material: stainless steel.
•     Operating temperature: -10 degrees. +50 degrees C.
•     Weight: 157 kg.
•     Temperature measurement time: 0.3 s.
•     Power supply: 230V / 50Hz.
•     Disinfection methods:
  •         Disinfection with an authorized disinfectant.
  •         Spray time: 3-5 sec.
•     Disinfectant: The disinfectant is used to remove viruses, bacteria and fungi, it is sprayed. Only authorized and certified biocides solution are used.
•     Productivity: about 500 passes / hour.
•     Disinfectant solution container volume: 23 liters.
•     The disinfectant is sufficient for about 24,000 passages, or about 5,000 operating hours.
•     Indicator light for disinfectant control.
•     Access control: photocell.
•     Includes container and pump.
•     Construction made of acid-resistant steel.
•     Number of spray nozzles: 4.
•     Operating mode: automatic.
•     Warranty: 12 months.