Combination Checkweigher and Metal Detector
CHARACTERISTICS
Combination Checkweigher and Metal Detector
- Eliminate the expense of two machines with the Thermo Scientific™ Combination Checkweigher and Metal Detector.
- Combining the superior performance of a Thermo Scientific™ VersaWeigh Checkweigher with the high sensitivity of a Thermo Scientific™ APEX Metal Detector,
- Checkweigher and Metal Detector gives you both accurate weight control and the assurance that your product is free of metal contaminants—all in a single space-saving instrument.
Product Description:
The Combination Checkweigher and Metal Detector Features:
- Separation of metal-contaminated products from potentially reusable off-weight products
- Independent reject operation from the metal detector and checkweigher output signals
- Basic or advanced level checkweigher to fit application.
- Highest level of sensitivity and stability with the lowest levels of false rejects in metal detector
- Advantages:
- One vendor for both product inspection requirements
- One service technician to support both devices
- Reduced number of product transfer points, line space requirements
- Reduced
- Reduced cost
- Ordering Information
- All Thermo Scientific™ checkweighers can be supplied in a combo configuration except the Thermo Scientific™ Teorema high-rate can weigher.
- Recommended for: Food, beverage, pharmaceutical and consumer goods industries
Full specifications:
- Air Supply: 5.5 bar (80 psi) nominal, 4 bar (60 psi) minimum
- IP Rating: IP 69K
- Flange Option: 50 - 300 mm stainless steel 304 straightlined material
- Languages: English, Spanish, French, German, Italian, Dutch, Chinese, Czech, Russian, Polish, Thai, Korean and Portugeuse
- Description: Combination Checkweigher and Metal Detector
- Height (Metric) Line: 630 - 1,150 mm, +/- 50 mm adjustment
- Dual Frequency/ Dual Gain: Frequency from 50 - 500 khz; gain either high or low
- Multicoil Design: Patented coil design resulting in a uniform, compressed magnetic field
- Applications: Conveyor
- Aperture Size: Width from 50 - 1,750 mm and height from 50 - 600 mm
- Audit Trails: Audit Check System
- Sensitivity: 0.8 - 5.0 mm ferrous, non-ferrous and stainless steel
- Model: 500, 300, 100
- IP69K Washdown:175F, 1450 psi, 4 gal / min, distance of 4 in., 30 sec at 0, 30, 60 90 degree angles
- Product Flow Type: Packaged
- Certifications/Compliance: cCSAus, CE, ATEX zone 22; ISO9001 certified Communications Modbus Ethernet TCP/IP or RTU serial
- Construction: Enclosure: Rated NEMA 4X Stainless Steel; Frame: Standard: 304 stainless steel
- Electronic Supply: Standard 115/220VAC, 50/60 Hz. 1 Phase
- Input Applications: Speed Sensor, Keylock, Product Select 1, Product Select 2, Product Trigger, Reject 1 Confirm, Reject 1 Complete, Reject 2 Confirm, Bin Full, External Suppression and Clear All Warnings/Faults/Alarms
- Input Types: 6 Inputs - Active 12V DC+12 volt auxiliary supply for input sensors
- Item Description: Checkweigher/Metal Detector Combination
- Operating Temperature: -10 to +40°C (14 - 104°F)
- Output Applications: Reject 1, Reject 2, AuditCheck, Fault, Alarm, Warning, QA lamp
- Output Types: 6 Relays outputs; Relays: 250 volt AC 2 amp max. 50 volt DC 1 amp max.
- Product Speed: 0.5 m/min (1.7 ft/min) to 1000 m/min (3,300 ft/min)
- Protection: IP 69K, NEMA 4X, ATEX zone 22, hazardous location Class II Division 2 Groups FandG
- Relative Humidity: 20 - 80% non-condensing
- User Manual Languages: English, Spanish, French, German, Italian, Dutch, Chinese, Czech, Russian, Polish, Thai, Korean and Portugeuse
- Input Allocation: Speed Sensor, Keylock, Product Select 1, Product Select 2, Product Trigger, Reject 1 Confirm, Reject 1 Complete, Reject 2 Confirm, Bin Full, External Suppression and Clear All Warnings/Faults/Alarms
- Output Allocation: Reject 1, Reject 2, AuditCheck, Fault, Alarm, Warning, QA lamp





